Best 3D Printers Under $300

Best 3D Printers Under $300

Today, we will discuss the Best 3D printers under $ 300 and experience a leap in product quality while still remaining in the budget category. If you’re serious about 3D printing as a hobby, spending $ 50-100 more on a better product will help a lot. Here, we present the best and cheapest 3D printers priced under $ 300 – or more precisely, 3D printers priced between $ 200 and $ 300 (note: prices are correct at the time of writing). So don’t expect super cheap 3D printers to sell for $ 150, even though they are technically less than $ 300.

Best 3D printers under $ 300

Before making a purchase, make sure you understand what the chosen product brings to the table. It is not fair to expect an economical 3D printer to be of the same quality as advanced 3D printers sold for $ 2000. Fortunately, with our guide to the Best 3D printers under $ 300, we could help you to set your expectations to a realistic level. Let us know your thoughts on this list by leaving your comments in the box below.

Monoprice Maker Select V2

If you’re looking for one of the best affordable 3D printers under $ 300 that lets you play while learning the details of 3D printing, the Monoprice Maker Select V2 and to you. It is a reliable entry-level 3D printer that offers excellent value on the table. It is a plug-and-play 3D printer. The printer is already assembled directly out of the box. All you have to do is tighten a few screws and you’re ready to go. In less than 30 minutes, you can start printing some of the test models on the SD card (the package also contains a filament for the initiator). For beginners, this first hassle-free installation is a great advantage.

Maker Select V2 contains a generous maximum build volume, although the announced 7.1 inch vertical space is misleading. In fact, you can print up to 15 cm due to the placement on the hot end. The building plate is heated, allowing reliable processing of ABS and other filaments that require higher temperatures to function properly. The print quality is impressive for a 3D printer sold for less than $ 300. It is polished and precise, complemented by a reasonably high print speed. However, like other 3D printers, the level of detail and the size of the project affect the rate: the more extensive and detailed, the longer the completion time.

Pros:

  • Extremely easy to assemble
  • Includes heated building plate
  • Supports standalone printing
  • Open for modification
  • Large build size
  • Great print quality

Cons:

  • No automatic leveling technology
  • No touchscreen interface

$ 259.99

$329.99

in stock

2 new
$ 259.99

1 used from $ 222.00

Amazon.com

Free Shipping

Last updated on April 25, 2020 6:26 am

Monoprice Select Mini V2

best 3D printers under $ 300

Our next choice for the best 3D printers under $ 300, we still have a product from Monoprice, one of the most popular brands in the economical 3D printer department. The Monoprice Select Mini V2 is available in two colors: black and white, with the first giving a more professional look. Select Mini V2 is fully assembled and can be printed directly from the box. Just go through the first installation, which should take less than 30 minutes, and you’re ready to go. The internal button-operated interface is easy to use and responsive, although it seems rudimentary – a touch screen interface would have been better.

The Select Mini V2 is light and compact and is designed for use on a PC. It looks great on any table and the reasonably quiet printing operation makes it less distracting while you work on other things. But, in exchange for the compact construction, you get a small building plate, which limits it to only small, generally non-functional items. On the plus side, the building plate is heated, which is not standard for an economical 3D printer. In most cases, it is necessary to adjust and install an economical 3D printer with a heated building plate. The heated wallboard means you can use ABS for printing, although we propose to maintain the PLA for the first few weeks as you go through the learning curve.

Pros:

  • Easy to use for beginners
  • Compact enough for placement on the desktop
  • Fully assembled, ready to use
  • Includes heated building plate
  • Robust construction

Cons:

  • Smallest build volume
  • Unreliable customer support
  • No touch screen

$ 304.03

in stock

2 new
From $ 304.03

Amazon.com

Last updated on April 25, 2020 6:26 am

XYZprinting da Vinci Jr. 1.0

XYZprinting da Vinci Jr. 1.0 is a fully incorporated 3D printer that offers fantastic value for such a low price that you may think there is an error in the product list. Da Vinci Jr. 1.0 comes in an attractive blue-white box and a stylish package that immediately informs you that the manufacturer cares about its products. It’s a plug-and-play 3D printer that requires just a few minutes of calibration before you can start printing. More specifically, you must ensure that the extruder and the printing base have the correct distance between them.

Best 3D printers under $ 200

Designed for home and classroom use, da Vinci Jr. 1.0 is a small internal interface that is operated with a series of buttons. It is easy to use. Even the technically challenged will have few problems managing it. The included software is also easy to learn, although it is not the most comprehensive when it comes to design options. In addition to ease of use, we have added two useful functions: the automatic filament system and the fast-spinning extruder. The first means that the machine takes care of everything as soon as the filament is loaded. With the latter, the extruder can be quickly removed for maintenance (or replacement of the extruder). Overall, this is one of the best 3D printers under $ 300.

Pros:

  • Completely closed
  • Easy to set up and calibrate
  • Low noise level
  • Includes automatic feed filament system
  • Extruder removes easily for maintenance

Cons:

  • Requires proprietary filament
  • No heated building plate
  • Low print speed

$ 579.95

in stock

2 new
$ 579.95

Amazon.com

Last updated on April 25, 2020 6:26 am

RepRapGuru DIY Prusa i3 V2

best 3D printers under $ 300

There are two types of people when buying a 3D printer for beginners: for those who want a pre-assembled or fully assembled 3D printer and for those who prefer to build their 3D printer with a DIY kit. If you belong to the latter group, the RepRap Guru DIY Prusa i3 V2 is for you. The set comes in a well-packed box. Find out what is easy, because all parts and pieces are labeled accordingly. The most challenging thing is to merge everything.

The manual provided is simple and easy to understand. However, the manual is for the older version of the printer, the V1, so some of the updates in V2 are not included. Expect to spend about 10 hours on assembly and calibration, including watching instructional videos on the Internet. If you are good at technical matters or have experience in electronics or machines, you can probably complete everything within 6 to 8 hours. That said, the RepRap Guru DIY Prusa i3 V2 is recommended only for those who like to touch machines and don’t mind getting their hands dirty.

After everything is set up, using the printer is simple. It is easy to use and can be done for days and without interruption, with minimal problems. It has a generous build volume, which significantly increases the type of items you can print and has a heated print bed. The latter function means that you can print with other materials if you think the PLA is too regular for you. Overall, this is one of the best 3D printers under $ 300.

Pros:

  • Generous construction size
  • Good print quality
  • Includes heated print bed
  • Supports various types of filaments
  • Capable of unbound printing

Cons:

  • Not recommended for beginners
  • Assembly and calibration takes a while
  • No main switch

$ 329.99

in stock

1 new
$ 329.99

Amazon.com

Free Shipping

Last updated on April 25, 2020 6:26 am

Anycubic Kossel 3D Printer

The Anycubic Kossel 3D printer is something we don’t recommend for beginners in 3D printing, mainly because delta 3D printers are more complicated. It is ideal for enthusiasts who already know the basic knowledge of 3D printing and have a lot of patience when working in electronics. Please note that the product included here is the “Pulley” version – the “Linear Plus” version is over $ 300, making it ineligible for inclusion.

The most striking difference between the two is that the “Pulley” comes with a smaller construction space. In terms of performance, “Linear Plus” has an advantage, but not so much. Made in China, the Anycubic Kossel 3D Printer arrives in a well-protected package. It is not quite ready for use, so you need time to assemble it. Depending on your experience with 3D printers and electronics in general, assembly and the first calibration process can take 3 to 10 hours.

Low-end 3D 3D printers are notorious because they have confusing manuals that only make the situation worse. This Anycubic delta printer is different. Assembly is simple and hassle free, thanks to the well-written manual. It is easy to understand, thanks to the surprisingly good texts in English (remember that the manufacturer is Chinese) and useful images. Overall, this is one of the best 3D printers under $ 300.

Pros:

  • Excellent instruction manual
  • Supports standalone printing
  • Includes initial filament
  • Great print quality
  • Light
  • Excellent customer support

Cons:

  • Build size smaller than advertised
  • Not ideal for beginners
  • Manual leveling of the bed can be a pain

Jgaurora A-3

best 3D printers under $ 300

Similar to the RepRap Guru DIY Prusa i3 V2, the Jgaurora A-3 is a do-it-yourself 3D printer that arrives unassembled and takes hours of manual labor to use. The two machines share many similarities, which is not surprising, as both are based on the original Prusa i3. The most striking difference is that RepRap Guru is based in the USA, while Jgaurora is based in China. Before the assembly and calibration process, allow at least 8 hours.

The less experience you have with electronics and machines, the more hours you will need. To guide you through the process, Jgaurora offers a series of instructions, both in written and video form. Everything you need to know about mounting the printer can be found on the SD card. However, as the product is Chinese, the instructions can be difficult to follow due to the level of English, which is understandable.

In short, the initial assembly and calibration process takes about 8 to 12 hours, depending on your experience with electronics and the ability to follow instructions that are communicated with less intensity than English. About the print quality and the performance of the machine, the Jgaurora A-3 will surprise you. Yes, it works relatively quietly for an open-frame 3D printer, supports different types of filaments and can continue for weeks with little to no problems. It is undoubtedly a reliable workhorse you can rely on for mass printing. Overall, this is one of the best 3D printers under $ 300.

Pros:

  • Sturdy and stable construction
  • Low noise level
  • Supports standalone printing via SD
  • Top-notch customer service
  • Easy-to-use built-in interface

Cons:

  • Intimidation of the initial calibration and assembly process
  • The instruction manual and videos can be confusing
  • No automatic leveling technology

$ 239.99

$299.00

in stock

1 new
$ 239.99

Amazon.com

Free Shipping

Last updated on April 25, 2020 6:26 am

Things to know before you buy the best 3D printers under $ 300

  • Produce quality: The best 3D printers under $ 300 are usually made from firmer, more solid materials, with products like the Jgaurora A-3, even with a complete metal frame for added durability. Obviously, regular maintenance and use play a significant role in the life of the 3D printer. However, it is good to have a machine that has been built to print for hundreds of hours without showing signs of collapse.
  • Size: As far as the maximum size is concerned, the best 3D printers under $ 300 do not differ from their cheaper relatives. It all still depends on the type of 3D printer. For example, you can create virtually self-adhesive DIY Prusa i3 clones for a build volume of at least 7 x 7 x 7 inches. On the other hand, embedded 3D printers and mini-3D printers still have small and medium print beds.
  • Heated printing bed: Speaking of print beds, the best 3D printers under $ 300 are more likely to have heated print beds. This means that you can try different types of filaments, including ABS and TPU. Almost all of the products we mention here are equipped with heated printing beds, so we have already covered them with them.
  • Print quality: In terms of print quality, the difference is not particularly dramatic, although it depends on the products you compare. Monoprice Maker Select V2, for example, guarantees significantly better results than the HopeWant Desktop 3D printer, which sells for about $ 150.

Best 3D printers under $ 300

3D printers for less than $ 300
Printer name Connectivity Weight
Monoprice Maker Select V2 USB, SD card 22 lb
Monoprice Select Mini V2 USB, SD card 9.9 lb
XYZprinting da Vinci Jr. 1.0 USB, SD card 26.5 lb
RepRap Guru DIY Prusa i3 V2 USB, SD card 12 lb
Anycubic Kossel 3D Printer USB, SD card 12.8 lb
Jgaurora A-3 USB, SD card 22 lb

Originally posted 2020-04-25 06:42:55.

The Techgadgetguides is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com Inc.
We will be happy to hear your thoughts

Leave a reply

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.

Tech Reviews and Guides | Techgadgetguides.com
Logo