Are you buying your first 3D printer? You have two options: accept a $ 1,000 3D printer and hope not to screw it up or get one of the Best 3D printers under $ 200 and learn the basics step by step. If the latter seems more interesting, you are at the right address here. Here, we talk about the best 3D printers under $ 200 you can buy right now, from DIY 3D printers to plug-and-play 3D printers.
Best 3D printers under $ 200
3D printing technology has quickly changed the world of rapid prototypes and engineering. Every amateur and novice engineer dreams of getting into technology and using it to make their design better and faster. Fortunately, after reading our Best 3D printers under $ 200, you can now make an informed decision about which cheap 3D printer suits you best.
Monoprice Select Mini V2
For one of the best 3D printers under $ 200, the Monoprice Select Mini V2 it certainly brings a lot to the table, even for the development of some of the most expensive 3D printers on the market. It is designed for use in the work area and comes in a semi-closed profile (partially covered with exposed cardboard and print head). The machine arrives fully assembled. Couple this with the relatively simple initial installation and you will have a 3D printer that allows you to start printing quickly.
Although the button-operated interface seems a little out of date in a technological world dominated by touch screens, the Monoprice Select Mini V2 is still easy to operate. It is ideal for beginners and contains simple settings. Due to the heated construction plate, this 3D printer differs from other products in the same price range. This allows the machine to process filaments other than ABS and PLA. However, for consistent results, we recommend that you stick with these two main filaments and store your experiments for when you buy a 3D printer with better capacity.
- Easy to operate
- Includes heated building plate
- Direct integrated interface
- Supports multiple filaments
- Limited build volume
- Customer support is not the most useful
- Manual calibration can be a hassle
If you want more volume, consult the CoLiDo DIY. It is an economical 3D printer that offers considerably more volume than our best choice, the Monoprice Select Mini V2. Even more impressive? It’s cheaper, for about $ 20 less. The warning? Well, the product name says it all. CoLiDo DIY is a DIY 3D printer that you must first assemble manually after unpacking. Therefore, you cannot start printing immediately.
The good news is that assembly and the first installation process are not very difficult, even if the manual is not the most detailed document. Expect to invest about 45 minutes to an hour to properly install the printer and prepare it for use. As soon as you use CoLiDo DIY, everything is smooth from that moment on. It is easy to operate and connects quickly to any compatible computer. Loading and unloading filaments is not very complicated and removing a completed project is a simple process.
In other words, the total number of newcomers will not have too many problems with the operation of the machine. In terms of print quality, CoLiDo DIY will surely surprise you. It is one of the best 3D printers under $ 200 that, so to speak, stand out above its weight. Print quality is accurate and comes with a level of smoothness that is not often seen on cheap 3D printers.
- Easy to assemble and use
- Large build volume
- Low noise level
- Good print quality
- Construction is robust and stable
- Can only process PLA filaments
- The instruction manual can be better
XYZprinting da Vinci Mini
The XYZprinting da Vinci Mini is an inexpensive 3D printer that comes with a relatively large build volume and an automatic calibration function. It is built-in and supports wireless connectivity. In short, it is the wireless version of the da Vinci mini marker. For a basic 3D printer, the da Vinci Mini is a decent choice. In the beginning, however, it takes a lot of patience. The first installation may take more than an hour, but not because the printer requires intensive physical work (that is, assembly of parts).
But, the problem is in the useless manual. It was so poorly done that we wondered why the manufacturer bothered to register it in the first place. Seriously, don’t even worry about the manual. Just go online and find videos and tutorials on how to install the da Vinci Mini. The da Vinci Mini is almost like the da Vinci miniMaker. The print quality is surprisingly good for a cheap 3D printer.
Best 3D printers under $ 500
It is accurate and detailed and is comparable to the print quality of 3D printers that is twice the price. The da Vinci Mini can easily switch to a $ 500 3D printer. The wireless connection is an excellent extra convenience. Overall, this is one of the best 3D printers under $ 200.
- Good print quality
- Large build volume for a mini 3D printer
- Easy to use, once fully configured
- Works quite quiet
- Includes automatic calibration
- Low quality instruction manual
- Requires proprietary filament
- No heated bed
XYZprinting da Vinci miniMaker
XYZprinting da Vinci miniMaker is an inexpensive 3D printer, intended for educational use. More specifically, it was developed to teach children the details of 3D printing. But it is also a good starting machine for adults who want to do 3D printing, although the appearance of LEGO may be a disappointment to some. The da Vinci miniMaker is equipped with a single extruder and is an embedded 3D printer, making it perfectly safe for children.
However, adult supervision is still recommended because children tend to lift their nose where they do not belong. The da Vinci miniMaker was designed with ease of use in mind. It contains an automatic calibration function and comes in a plug-and-play installation. The initial installation should not take more than an hour, although things may have been more natural if only XYZprinting wanted to write a more detailed manual.
The print quality is excellent. It is not in the same class as 3D printers in the $ 1000 range. However, for a $ 200 3D printer made for educational use, it exceeds expectations and produces items with precision that other low-cost 3D printers are jealous of. . The generous maximum construction volume is also a great advantage, so you can accept projects that are not possible with the Monoprice Select Mini V2. Overall, this is one of the best 3D printers under $ 200.
- Print quality exceeds expectations
- Large build volume for a cheap 3D printer
- Easy to operate, once fully configured
- Includes automatic calibration
- Useless instruction manual
- Expensive proprietary filaments
Instone Easier Mini
The Instone Easy Mini 3D Printer is a fun and small machine designed for children and beginners in 3D printing. It’s a standard 3D printer, so don’t expect too much in terms of quality and printing features. The printer is fully assembled and ready to use. In less than 30 minutes, you can start printing your first project. It is a plug-and-play 3D printer that requires minimal adjustments to get started.
The first installation is quite simple, even if the manual provided is useless. Light and compact enough to be used on a table, the Instone Easy mini 3D printer is easy to operate, essential for beginners. The custom software included is not very complicated, with simple configurations that should be easy to understand, even for non-technicians. The removable construction plate also facilitates the removal of finished products.
When it comes to print quality, the Instone Easier Mini 3D Printer is not the most impressive, which is not surprising, as it is a cheap 3D printer. The print quality is reasonable. It’s good enough to impress kids and beginners who print in 3D for the first time. The machine works relatively quietly, which is also one of the reasons why it is one of the best 3D printers under $ 200.
- Light and compact
- Includes a PLA filament spool
- Plug-and-play configuration
- Removable building plate
- Custom software is suitable for beginners
- Cheap build quality
- Low printing speed
Geeetech Pro W
The Geeetech Pro W is a clone of the Prusa i3. It is an affordable 3D printer that works well as a starting machine for those who want to immerse themselves in the world of 3D printing. Like CoLiDo DIY, Geeetech Pro W is a DIY 3D printer that needs to be assembled from top to bottom. The assembly and calibration process can take about an hour or two, depending on how good you are at following the instructions and setting things up.
Detailed instructions can be found on the internet; therefore, don’t worry about getting lost during the assembly process. The construction quality is not the best there is. It is made of wood – yes, wood – instead of metal. On the other hand, the printer remains stable when you are able to assemble it. The machine is stable during printing, which means that there are fewer examples of wasted designs.
Speaking of quality, the print quality of the Geeetech Pro W is about what you would expect from a cheap and inexpensive $ 200 3D printer. It’s not the smoothest or the most detailed, but you can be sure that the printer won’t is -functional produces items that should be good enough for beginners and teachers. The large volume of construction is also good. This allows you to take on bigger and more ambitious projects, if you are familiar with the basic principles of 3D printing. Overall, this is one of the best 3D printers under $ 200.
- Relatively easy to assemble
- Allows autonomous printing via SD card
- Stable construction
- Decent print quality
- Includes starting reel
- Low printing speed
- Wireless connectivity announced, but sold separately
Best 3D printers under $ 1000
Originally posted 2020-04-19 07:03:29.